Graham Farish 372-063SF MR 3835 (4F) Class 4057 LMS Black N Gauge with Fitted Sound/Speaker

Beautifully imposing steam locomotive from era 3 in pristine LMS Black livery. Bearing running No. 4057, this locomotive comes with an accessory pack, a Fowler Tender and NEM Coupling Pockets.  Also boasts a powerful coreless motor, loco-drive mechanism and tender pick-ups
Speaker Fitted
SOUND FITTED - Fitted with a Zimo MS590N18 Sound Decoder – See below for the function list
Length 113mm

SOUNDS

F1 - Sound On / Sound Off

F2 - Brake (Non-Latching)

F3 - Cylinder Drain Cocks

F4 - Single Whistle (Speed Related)

F5 - Reverser

F6 - Shovelling Coal

F7 - Injectors

F8 - Blower

F9 - Flange Squeal (Speed Related)

F10 - Safety Valve

F11 - Handbrake (locomotive will not move with the handbrake applied)

F12 - Water Tank Filling

F13 - Coupling Clank

F14 - Light Engine Mode

F15 - Fade All Sounds

F16 - Guard’s Whistle

F17 - Unfitted Freight Mode

F18 - Toot-toot Whistle

F19 - Long Duration Whistle

F20 - Medium Duration Whistle

F21 - 'Going under Harry’

F22 - 'That’s an all clear from the guard’

F23 - Guard to Driver, Freight

F24 - Guard to Driver, Passenger

F25 - Volume Down

F26 - Volume Up

Analogue Users: Normal-load running sounds, acceleration steam chuff sounds and any other automatic and randomised sounds can be enjoyed when using this model on analogue control (DC) straight from the box!

Recently upgraded with a Next18 DCC interface and a pre-fitted speaker – allowing this SOUND FITTED model to be produced - the Graham Farish MR 3835 model features a wealth of detail, with many separately fitted parts including the fine metal handrails, safety valves and whistle, and even a representation of the inside valve gear engraved into the chassis and visible below the boiler. Whilst relatively straightforward, full attention has been paid to the livery application which is achieved using authentic logos and fonts whilst the detailed cab interior is brought to life with pipework, fittings and gauges all present and decorated appropriately.

MIDLAND 3835 CLASS HISTORY

Designed by Henry Fowler for the Midland Railway (MR), the 3835 Class was first introduced in 1911. Construction of these 0-6-0 freight locomotives was shared between the Midland Railway’s Derby Works and outside contractor Armstrong Whitworth, with 197 examples built by 1922; 192 for the Midland Railway and five for the Somerset and Dorset Joint Railway (S&DJR).

After the Grouping in 1923, the London Midland and Scottish Railway (LMS) inherited all 192 locomotives from the MR (and later the five S&DJR examples when it absorbed that company in 1930) and gave the locos the designation Class 4F. The LMS commenced construction of further 4Fs, much to the same design as the 3835 Class, although the LMS-built locos were left hand drive whereas the original Midland machines were right hand drive.

The 4F was seen as the ultimate development of the 0-6-0 tender locomotive and the type epitomised the British goods engine. The LMS went on to build 575 examples between 1924 and 1941 and all of them, plus the 197 Midland-built locos, entered BR stock following Nationalisation in 1948.

Withdrawals did not commence until 1954, with the 3835 Class all gone by 1965 (the last 4Fs would survive only a year longer), however one MR-built locomotive has survived into preservation, No. 43924. No. 43924 is also notable as being the first locomotive to leave the Woodham Brothers Scrapyard in Barry, South Wales, when it departed in September 1968 for its new home at the Keighley & Worth Valley Railway where the loco is still based today.